Topband: PE coated RG6

Topband

Topband: PE coated RG6

To:	<yccc@contesting.com>, <topband@contesting.com>, <hi-zreceivingarraydiscussions@hizantennas.com>
Subject:	Topband: PE coated RG6
From:	"Craig Clark" <jcclark@myfairpoint.net>
Date:	Fri, 14 Dec 2012 10:20:03 -0500
List-post:	<topband@contesting.com">mailto:topband@contesting.com>

Anyone have any success installing compression F connectors on polyethylene
coated RG6?

 

I am having no luck with either double or quad shield compression or older
crimp F connectors.

 

 

 

Craig Clark K1QX

QX Electronics

PO Box 209

107 Fitzgerald Rd

Rindge NH 03461

(603) 899-6959 office

(603) 520 6577 cell

 

_______________________________________________
Topband reflector - topband@contesting.com

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Topband: PE coated RG6, Craig Clark <= Re: Topband: PE coated RG6, Pete Smith N4ZR Re: Topband: PE coated RG6, N1BUG Re: Topband: PE coated RG6, Rick Karlquist Re: Topband: PE coated RG6, Grant Saviers Re: Topband: PE coated RG6, HAROLD SMITH JR Re: Topband: PE coated RG6, Jim F. Re: Topband: PE coated RG6, Jim F. Re: Topband: PE coated RG6, Mike Waters Topband: F-connector installation tool (was: PE coated RG6), Richard (Rick) Karlquist Re: Topband: PE coated RG6, Mike Waters

Previous by Date:	Re: Topband: Optimal radial wire type and gauge?, Lennart M
Next by Date:	Re: Topband: PE coated RG6, Pete Smith N4ZR
Previous by Thread:	Topband: Optimal radial wire type and gauge?, Rick Kiessig
Next by Thread:	Re: Topband: PE coated RG6, Pete Smith N4ZR
Indexes:	[Date] [Thread] [Top] [All Lists]