Just a thought, but has anyone checked to see if there is a dead-end / preform
type of grip that will work on the older style phillystran cable? That might
make a better connection than the clamps and thimble setup.
-Bill
> -----Original Message-----
> From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of
> Tom W8JI
> Sent: Friday, May 30, 2014 3:40 PM
> To: HAROLD SMITH JR; Grant Saviers; 160
> Subject: Re: Topband: Fwd: cable clamps on old Phillystran
>
> The only damage on my Yagi antennas from the ice storm we had (about an
> inch of radial ice) was to Philliystran struts. In every case the jacket held
> in
> place under the clamps but the strand inside moved. Now I have to rent a
> crane with man basket to repair the struts.
>
> The end attachment with three clamps is obviously not a good system.
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|