Topband
[Top] [All Lists]

Re: Topband: Ferrite beads

To: "Joe K2UF" <joe@k2uf.com>, "'Topband Reflector'" <topband@contesting.com>
Subject: Re: Topband: Ferrite beads
From: "Carl" <km1h@jeremy.mv.com>
Date: Wed, 20 Aug 2014 15:39:48 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Anyone know if the ferrite beads that are encased on the cables of older CRT
monitors are any good for use in the shack.

This has probably been asked before but I can not find any info.

Thanks ,

Joe K2UF
Since most of those come from Asia it is anyones guess what mixes are used 
by who. It would be simple enough to wind 10 turns, measure inductance and 
then zero in on the Al value using the published formula.
Carl
KM1H



_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>