If you are going to make the order, consider using several in parallel to
improve the surge handling capability. I use 6x 2700 ohms here.
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
-----Original Message-----
From: Jorge Diez CX6VM
Sent: Monday, December 28, 2015 12:53 PM
Cc: 'topband'
Subject: Re: Topband: beverage resistors at Mouser.com
Thanks all for the help, very useful information
Happy New Year!
73,
Jorge
CX6VM/CW5W
De: Mike Waters [mailto:mikewate@gmail.com]
Enviado el: lunes, 28 de diciembre de 2015 03:15 p.m.
Para: Jorge Diez CX6VM
CC: topband
Asunto: Re: Topband: beverage resistors at Mouser.com
Jorge,
Those might work, although they might be inductive (but probably not enough
to matter at 160m) and might not have the surge rating that the Ohmite OY
resistors have. But I am not sure.
The ones below are the ones everyone uses. However, the 2W 470 ohm type OY
appear to be out of stock. The ones below should work fine.
588-OY-470-E
<http://www.mouser.com/ProductDetail/Ohmite/OY471KE/?qs=sGAEpiMZZMvmQ%252bOLa8n%2fM0AL619UxluYs%252bchll6qvbU%3d>
588-OY-390-E
<http://www.mouser.com/ProductDetail/Ohmite/OY391KE/?qs=sGAEpiMZZMvmQ%252bOLa8n%2fM9UfS4H1uSv96z622JnjmoY%3d>
588-OX-470-E
<http://www.mouser.com/ProductDetail/Ohmite/OX471KE/?qs=sGAEpiMZZMvmQ%252bOLa8n%2fM0AL619UxluYHfapLNvkuuU%3d>
73, Mike
www.w0btu.com
On Mon, Dec 28, 2015 at 11:31 AM, Jorge Diez CX6VM <cx6vm.jorge@gmail.com>
wrote:
I am looking for beverage resistors, I think 470 ohms 2 watts will be OK,
right?
In mouser.com I found 660-MOS2CT52R471J and 660-MOS2C471J
Which one is better? Or maybe another part number that you know?
---
El software de antivirus Avast ha analizado este correo electrónico en busca
de virus.
https://www.avast.com/antivirus
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|