Could you point me in the direction of a circuit for this I'm struggling to
visualise it,
Thanks
Trevor
EI2GLB
----- Original Message -----
From: Roger D Johnson <n1rj@roadrunner.com>
To: MR TREVOR DUNNE <ei2glb@eircom.net>
Sent: Sat, 23 Sep 2017 14:00:39 +0100 (IST)
Subject: Re: Topband: Relay switching at the base on antenna
Sure! I'm doing it with a 24 volt vacuum relay at my antenna. Run 12 volts to
the antenna and through a series diode (for isolation) in the return line to the
transceiver PTT. I have another diode in series with the amp keying circuit to
keep it from affecting the relay at the antenna and vice versa.
On 9/23/2017 8:39 AM, MR TREVOR DUNNE wrote:
> Hi All
>
> Can Anyone tell me a simple way to switch a 12v relay at the base of an
> antenna using the rigs ptt as the trigger??
>
> Thanks
> Trevor
> EI2GLB
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|