To: | W0MU Mike Fatchett <w0mu@w0mu.com> |
---|---|
Subject: | Re: Topband: Adding chicken wire or mesh on top of radial field |
From: | Eugene Colton <epcolton@gmail.com> |
Date: | Mon, 29 Jan 2018 10:50:43 -0700 |
List-post: | <mailto:topband@contesting.com> |
My experience it helped a lot on top of my minimal 160 radial field by adding much wire square footage to the ground radials. It might not add much improvement to a very extensive 160 radial field however. Expect your SWR to increase somewhat. AF9O On Sat, Jan 27, 2018 at 11:55 AM, W0MU Mike Fatchett <w0mu@w0mu.com> wrote: > I have some 6ft wide chicken wire I can roll out on top of my existing > radial field for 160. Does anyone have an idea what this might do? > > W0MU > > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: How to determine impedance, Grant Saviers |
---|---|
Next by Date: | Re: Topband: Adding chicken wire or mesh on top of radial field, Bryon Paul Veal NØAH |
Previous by Thread: | Re: Topband: Adding chicken wire or mesh on top of radial field, Mike DeChristopher |
Next by Thread: | Re: Topband: Adding chicken wire or mesh on top of radial field, Bryon Paul Veal NØAH |
Indexes: | [Date] [Thread] [Top] [All Lists] |