Hi
I like to build a 9 RX-circle for 160M @PI4CC.
We don't have the space for Berverages so this maybe a good way to get
better RX on 160M
My question is, how do does pre-amps used in the YCCC kit sold by
DX-engineering hold up, if you use it in a M/M setup where the antennas
are close spaced?
Close space means all TX antennes are in a 40 by 60 meter lot and the
RX-circle will by say 50 meter away from the nearest TX antenna (the
center vertical RX arry)
Is there any intemodulation of unwanted mixing in the pre-amp if the 5
othe rbands are trasmitting?
A picture from above and all those antennes in this lot at
https://www.pi4cc.nl/tour/outdoor/
The pre-amp in the YCCC uses a AD8055
(https://www.dxengineering.com/search/product-line/yccc-receive-antenna-feedpoint-preamp-kits)
Peter
PC2A
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|