Gentlemen,
I have been lurking in the background for over a year there have been some
excellent learning possibilities.
Thank you all. now on to my question.
I have a 1/4 wave vertical (about 66 feet) for 75-80 meters I would like
to try and make it resonate on 1.825. If I put the analyzer on it I don't
understand the reading.....I know the swr is bad on 160 because the
kpa-1500 will not match it. If possible I would like to add a coil at the
bottom with a relay to switch in and out. Any ideas length of wire,
diameter, of coil, and size of wire, for 1500 watts I am not worried
about receive only transmit.
Doug WD8Z
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|