Never seen uhf connectors in military. Lots of N tho
Sent from my Verizon 4G LTE smartphone
-------- Original message --------
From: john@kk9a.com
Date: 12/7/18 9:13 AM (GMT-08:00)
To: topband@contesting.com
Subject: Re: Topband: Rather use N-type (was Re: The answer to PL-259
Perhaps you are looking at the N connector lead, the actual pin where RF
flows is Ø.120 which is not much smaller than a UHF connector (Ø.156). I
use a number of N connectors at my station and have no issues.
John KK9A - W4AAA
Bruce w8hw wrote:
I worked in the commercial/industrial radio and broadcasting for 40 plus
years. While it it true that type-n is mostly used, we must remember
that hams deal with high power and high SWR sometimes, both are not
type-N strong points because of the small pin used in type-N can not
handle the high current caused by SWR and high power as well as the
thicker pin used in a PL259.
73, Bruce, W8HW
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|