To: | James Wolf <jbwolf@comcast.net> |
---|---|
Subject: | Re: Topband: 10 to 1 Ferrite Balun |
From: | Don Kirk <wd8dsb@gmail.com> |
Date: | Tue, 19 Mar 2019 15:51:06 -0400 |
List-post: | <mailto:topband@contesting.com> |
Hi Herb, I totally agree with Jim (KR9U), wind your own since you said you have 73 material binocular cores. For my pennants and other low band RX antennas I use BN73-202 binocular cores. I would probably go with 3 turns on the primary and 10 turns on the secondary. If you have wire wrap type wire this makes winding the transformer very easy (no concern of scratching enamel coating off the wire), and it should just take you a couple of minutes to wind. Don (wd8dsb) > > _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: 10 to 1 Ferrite Balun, James Wolf |
---|---|
Next by Date: | Topband: Harold Beverage interview., FZ Bruce |
Previous by Thread: | Re: Topband: 10 to 1 Ferrite Balun, James Wolf |
Next by Thread: | Topband: Harold Beverage interview., FZ Bruce |
Indexes: | [Date] [Thread] [Top] [All Lists] |