I forgot the link in my last post.
https://www.youtube.com/watch?v=QuMwGDK6IhQ&t=42s
>I'm getting serious about running another BOG antenna, my first was
destroyed by
>a bulldozer after the hurricane.
> As long as I'm putting in the labor, I want to build the best I can.
I have searched
>and don't find anything really new, just match and terminate properly,
keep it on the ground,
>not covered by debris, and make good grounds. W8JI has the ferrite
loading idea, for regular BOGs,
>which I did use about 9 binocular cores (thru one hole) on my previous
BOG.
> Are there any improvements to BOG antennas floating around?
>My main use will be AM BCB, but some 160M and 80M, but any
optimization would be for AM band use.
> Here is a comparison of my 250ft BOG to my 150ftlong wire, 30ft high.
>Note: my B0G feed line was twisted speaker wire. That's a subject for
a different thread.
>
> Mikek
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|