| To: | topband@contesting.com |
|---|---|
| Subject: | Re: Topband: Inv L corner insulator |
| From: | Rob Atkinson <ranchorobbo@gmail.com> |
| Date: | Sun, 26 Sep 2021 04:57:50 -0500 |
| List-post: | <mailto:topband@contesting.com> |
My hunch is that your problem is the wire you are using. My inv. L is strung with hard drawn 7 strand bare AWG 14 copper. Multi-strand or solid soft drawn will probably break on you eventually. 73 Rob K5UJ _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: Inv L corner insulator, Jim Brown |
|---|---|
| Next by Date: | Topband: Inverted L's etc, W3HKK |
| Previous by Thread: | Re: Topband: Inv L corner insulator, Jim Brown |
| Next by Thread: | Topband: Inverted L's etc, W3HKK |
| Indexes: | [Date] [Thread] [Top] [All Lists] |