---------------------
Forwarded message:
From: epriv@innet.com (Ed-W4EP)
To: WR34SHE@shellus.com
CC: owner-towertalk@paris.akorn.net
To: <towertalk@contesting.com>
Date: 97-01-29 13:27:41 EST
At 14:23 1/28/97 CST, you wrote:
>FROM: SAM EFFINGER SIET UTILITIES
>SUBJECT: FT1000MP SERIAL NO.
>I am buying a used FT1000mp and was wondering if there are any mods for
>them and if anything can be told by the serial number?
>
>This has a serial no. of 5j020079
Call the factory and ask for John in service. He owns an MP. It will be
worth the $2.
Secondly, I just bought an MP about a month ago. Got it for our summer
place. Sat it beside my 1000D and
used them both for the Heard Island thing. I really liked the MP. Bought
the 250cy filters {2} and the 500cy for the "B" receiver. I found one
SERIOUS problem. Adjacent freq strong signal rejection is VERY poor. Example:
On 80m CW The DX is at 3522 listening up 5+. I hear key clicks, 100s of key
clicks that raise the "noise" level on 3522 to S9 PLUS making it almost
impossible to copy the weak VK0. I turned on my 1000D, threw the ant switch
and it was almost totally gone.
I retested this using sideband. If the pile up signals were really strong
the same thing happened. Knowing this a month ago I would have opted for
another used FT-1000 rather than the 1000MP.
I want to point out that I like the MP, it has a lot of neat features. I
was really pleased by the ability to "mix and match" IF filters from the
front panel and the way the shift/width is set up compared with the 1000D.
Just some observations.
Cheers de Ed, W4EP
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & N4VJ / K4AAA
|