Towertalk
[Top] [All Lists]

[TowerTalk] Rohn work platform/Belts

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rohn work platform/Belts
From: mai@iquest.net (Patrick Croft)
Date: Fri, 6 Jun 1997 11:20:48 -0400 (EDT)
>Ken,
>
>If you're planning on trying various antennas and being on the Rohn 25 much,
>the platform, while quite small, does offer your feet and legs a break
>compared to standing on the brace rungs for any serious length of time.  On
>the 'Con' side, it can seem to always be in the wrong place when you are
>working about an area.  I've had them for 25 years, and only take up when I
>know I'm going to be focusing on ONE problem, and hopefully, ONE area.  Two
>platforms don't help at the same level, but offer advantage of not
>constantly re-positioning the solo unit.
>
>Belts are vital!!!  Many reforms in the design and certification in the past
>couple years.  Once only a market that Klien controlled, now others are in
>the game and prices are down.  Good souces for info: tree services and your
>elctric & cable installers.  Ask them questions while offering a cold pop
>from your cooler.  As for buying, don't overlook the industial distributors
>- firms like W.W. Graingers handle them as well as others.  Be very careful
>about using hamfest specials and hand-me-downs from well meaning old timers
>- cracked leather is sure sign you might not get to be an old timer.   For
>caring of the belt you do get, if leather, check a tack store or grain &
>feed supply as they will have various cleaning and maintenance products to
>insure a long life for your belt.  Do not toss in the corner of your garage
>or storage shed and then trust your life to 'luck' six months or two years
>later.  The newer materials in some of the less expensive belts lessen the
>maintenance chore, but do remember that this is the most important part of
>your antenna system, so treat it well.
>
>Bests Always,
>
>Patrick
>WB9IQI
>
>At 10:58 PM 6/5/97 -0400, you wrote:
>>Hello Gang,
>>
>>     The plan is coming together. It's gonna be 42 feet of Rohn 25 and 5
>>feet or so of mast.  (I can go 50 feet without going to the zoning board
>>for a variance!)  The marker stakes are out in the back yard now, and I
>>think my bride is starting to suspect that I'm not laying out new flower beds.
>>
>>     While I'm ordering the tower parts, is it worth getting a snap on
>>"work platform" from Rohn?  (I'm not an antique yet, but...)
>>
>>     Also, what features do you look for when buying a climbing belt?  I
>>WILL have experienced climbers put the tower up, but intend to do my share
>>of the work as well as maintain the installation afterward.
>>
>>     If the belt thread has already been done to death here, please email
>>me direct.
>>
>>TNX and 73, Ken
>>    
>>
>>Ken Freedman
>>AKA: N1QQV/QRP  VE, EC Madison CT, QRP-L
>>Living Proof That, "You don't have to be a blonde to be light headed!"
>>
>>
>>--
>>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>>Submissions:              towertalk@contesting.com
>>Administrative requests:  towertalk-REQUEST@contesting.com
>>Problems:                 owner-towertalk@contesting.com
>>Search:                         http://www.contesting.com/km9p/search.htm
>>
>>
>
>
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Rohn work platform/Belts, Patrick Croft <=