Just a short caveat when checking lo range fuses ie 1/4 - 1/8 amp be aware of
the
Current your ohmmeter passes as dependent on range settings etc you could blow
An otherwise good fuse. 73 - Dick KH2G
-----Original Message-----
From: Dr. Richard W. Musicer [SMTP:n6cr@ix.netcom.com]
Sent: Friday, August 22, 1997 3:51 PM
To: towertalk@contesting.com; stratto
Subject: Re: [TowerTalk] T2X
You wrote:
> fuse looks fine.
The meter fuse on the circuit board is 250ma. How can you look at a
1/4 amp fuse and decide it 'looks fine'????? Try an ohmmeter.
I just had to replace mine.
GL/73 de Rick, N6CR in Atlanta
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|