Dan -
I am using a G-2800SDX to rotate a KLM 40M4 (4-el 40 with 42' boom) and
a KT34-XA. Although it seems to turn more slowly than my '1000 did with
the 'XA and a Cush 40-2CD, it seems to be happy with no problems, except
of course you must use a stainless steel pin or the mast will turn on
its own. All Yaesu rotators suffer from this, and I am used to it.
I recommend it.
73 de Jeff K2KV
k2kv@netusa.net
-----------------------
>
> What I would like to know, is, what applications have you all put these
> rotors to. Especially I want to know, have any of you pushed it over its
> limits and its doing well, or not so well??
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|