Towertalk
[Top] [All Lists]

[TowerTalk] How much concrete??

To: <towertalk@contesting.com>
Subject: [TowerTalk] How much concrete??
From: garyk9gs@solaria.sol.net (Gary Schwartz)
Date: Thu, 9 Oct 1997 01:19:39 -0500 (CDT)
A local ham is giving me a 27 foot steel light standard.  It is tapered,
going from about 8 inch diameter at the base, to about 3 inches at the
top.  It is octagonal in cross section and has a wall thickness of
approximately 3/16 inch. They are originally designed to be free standing.

I want to use this strictly for supporting VHF verticals for packet and
perhaps small 6M and 2M yagis. Since I live on a hill, the height is
perfect for this application.

I have two questions:

1) How does one determine the proper size concrete base?  The manufacturer
is unknown.

2) Does anyone have any ideas on how to best mount this thing?  I have
thought of setting a suitable sized (8 inch OD) piece of well casing in
concrete, with perhaps 2 feet sticking out, and bolting the light standard
to the well casing after lowering the light standard over it.  I will probably
have to fabricate some type of shims to take care of the taper.  
Any other ideas?

73,
Gary K9GS 
   __________________
  /       K9GS       |______________________________
 /   FP/K9GS, TO5M   |Society of Midwest Contesters |____________________
(                    |   garyk9gs@solaria.sol.net   |                   /
 \   Gary Schwartz   |   K9GS@WA9KEC.WI.USA.NOAM    | Greater Milwaukee/
  \__________________|     PacketCluster: NB9C      |  DX Association (
                   (________________________________|       GMDXA      \
                              KNOW CODE !         (_____________________\




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>