If this is a stupid question, please forgive me in advance. I have 9913
going from the shack out to the tower site. I don't want to run the 9913 up
a crank up because it's probably too rigid and would be damaged from the
lowering/raising motion. Can I use RG-213 or 8 from the antennas down the
tower and connect it to the existing 9913 that goes up to the shack? I've
never mixed coax before, hence my question: Is there a problem with velocity
factor/or capacitance/or signal loss mixing coax?
Jim KS1A
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|