Towertalk
[Top] [All Lists]

[TowerTalk] blocks

To: <towertalk@contesting.com>
Subject: [TowerTalk] blocks
From: mikemr@nwlink.com (Michael Mraz)
Date: Fri, 17 Apr 1998 14:36:24 -0000
The Harken marine-grade snatch block rated at 2,250lb
safe working load is $168 list. I don't know what you
bought, but maybe there's an extra "0" in the working load.

The Harken blocks that have 1-1/2" sheaves are rated
around 300lb safe working load, and are around $12 list.

73   Mike   N6MZ

----------
From:  Malcolm Clark[SMTP:rudder1@ibm.net]
Sent:  Friday, April 17, 1998 10:11
To:  Pat Barthelow; towertalk@contesting.com
Subject:  Re: [TowerTalk] blocks

Pat Barthelow wrote:
> 
> HI Russ,
> 
> We found a very small, deceptively strong block at a local marine supply
> store.  Stainless steel, and nylon body/wheels with ball bearings, the
> thing was not too
> expensive...about $12.00. The pulley wheel was only about 1-1/2" diameter,
> but
> the block was rated at 2000 lbs working load.  



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>