Towertalk
[Top] [All Lists]

[TowerTalk] TIC RIngrotor indicator problem

To: <towertalk@contesting.com>
Subject: [TowerTalk] TIC RIngrotor indicator problem
From: k3mm@erols.com (Tyler Stewart)
Date: Sat, 23 May 1998 04:14:37 +0100
It's the ten turn pot in the motor assy.  He used to use a Clarostat (it's a
black case) and now uses a blue Bourns pot that is supposed to be somewhat
water resistant.  Both are available in the Digikey catalog.

500 ohm, 10 turn, 1/4" shaft...

73, ty K3MM

-----Original Message-----
From: Barry Kutner <w2up@itw.com>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Saturday, May 23, 1998 01:29
Subject: [TowerTalk] TIC RIngrotor indicator problem


The indicator on my TIC Ringrotor is starting to act up again -
needle starts jumping around and rotor stops turning. I believe I
read somewhere that TIC was working on a fix, like a different kind
of indicator pot. Anyone know if they ever came up with something
that keeps on TICking?
Tnx/.Barry
--
Barry Kutner, W2UP              Internet: w2up@itw.com
Newtown, PA         FRC         alternate: barry@w2up.wells.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>