about 100$ to rebuild a tail twister at the factory with fast turn
around..
Yaesu is expected to be much more with a longer wait.
consider the tailtwister with the DCU-1 digital control box. I like mine
very much.
no problems at all.. And I like the 6 possible presets when I want to
monitor
UHV/VHF prpagation beacons. The DCU control box is microprocessor based
and solves many of the historical problems of manually applying the
wedge
brake prior to the rotator stopping, and backing out when starting to
ease the
wedge brake release as well as proportional speed control when reaching
the
determined position.
Stan, WA1ECF
Swilsonac6@aol.com wrote:
> I am in the market for a rotor to mount in my tower.
> Plan to turn a 3 element quad (18 ft boom) and some 2M beams
> Considering the Yaesu G-1000SDX and the Hy-gain T2X
> Does anyone have any experience or knowledge that would help me choose
> between
> these two products?
> I apologize for this post knowing that this is not very interesting
> unless one
> is making a buying descision but would appreciate any comments or
> suggestions.
> Thanks,
> Steve Wilson AC6DR
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|