Towertalk
[Top] [All Lists]

[TowerTalk] rotor bolts

To: <towertalk@contesting.com>
Subject: [TowerTalk] rotor bolts
From: calav@flash.net (Ken Hirschberg)
Date: Fri, 29 Jan 1999 21:12:29 -0700
Call the Olander company, Sunnyvale, CA    Regards, Ken  K6HPX

dan hearn wrote:

> Ed, I have been looking for a source of bolts with the safety wire holes in
> them, both standard and metric. Also stainless safety wire. Where do you get
> them?. 73, Dan, N5AR
>
> edbruns@juno.com wrote:
>
> > If you have trouble with your rotor mounting bolts backing out,
> > do what an aircraft mechanic does  --- safety wire it. Either drill
> > holes in the existing bolts or buy new ones with holes in them,
> > wire it up and forget it. Pilots don't like to lose props, hams hate
> > to lose rotors.
> >
> > Ed, W3EKT.
> >
> > ___________________________________________________________________
> > You don't need to buy Internet access to use free Internet e-mail.
> > Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
> > or call Juno at (800) 654-JUNO [654-5866]
> >
> > --
> > FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> > Submissions:              towertalk@contesting.com
> > Administrative requests:  towertalk-REQUEST@contesting.com
> > Problems:                 owner-towertalk@contesting.com
> > Search:                   http://www.contesting.com/km9p/search.htm
>
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>