I *assume* that the tilt over post is made of metal.
I *assume* that there is a mechanical / electrical
connection between the tilt over post and the tower.
Therefore, I *conclude* that the tower is grounded
through the tiltover post.
What am I missing here?
FWIW, ALL 7 of my towers are 'in the ground'.
NO concrete, NO ground rods, NO radials, and
NO Lightning damage / hits to the towers in >20
years. Tower heights are 40, 55, 75, 80, 95, 130
135 ft. I have seen lightning or evidence of lightning
strikes to neighbors utility poles and trees.
One more thing, ALL of my coaxial feedlines,
mostly CATV hardline but some RG-213, go down
to the ground and are routed in shallow open trenches.
de Tom N4KG
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|