Towertalk
[Top] [All Lists]

[TowerTalk] What is the advantage to drilling the spreader to attach wir

To: <towertalk@contesting.com>
Subject: [TowerTalk] What is the advantage to drilling the spreader to attach wires?
From: K7GCO@aol.com (K7GCO@aol.com)
Date: Mon, 17 Sep 2001 00:40:50 EDT
In a message dated 9/16/01 7:35:34 PM Pacific Daylight Time, poster@gate.net 
writes:

<< 
 If there is any? Ive seen the way Lighting Bolt attaches the wire
 through small tubes and
 hose clamps. I have seen where using that way lets the spreaders
 sometime get out of
 alignment beacause the tube slides on the wire.
 
 I wonder if drilling like Qubex does will weaken the spreader
 any????????
 What do you think????????
 
 Jack
  >>
It's a very good technique for attaching the wire to the poles  I had heavy 
winds with ice loading with no shift.  The small .062" aluminum welding wire 
did stretch but not shift with a 5 band 2 element quad.  I could see where 
that could happen with a mono bander but not a 3 or 5 bander.  Add insulated 
pig tails around the loop.  That will stop it.  k7gco

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>