We decided to refurbish the XA at our local club station and had cracks
starting from the mast clamp holes exactly as your picture shows. Ours was 1/4
inch thick.
We used the old one as a pattern and made a new one out of 3/8 aluminum plate.
No problems for 2 years, but it is one of those things that gets checked very
closely any time someone is up the tower.
de na0ia
At 04:58 PM 3/23/02 , mcduffie@actcom.net wrote:
>
>The picture mentioned in an earlier post by Steve, K7LXC, is posted at:
>www.actcom.net/~mcduffie/xaboom.jpg
>
>It is about 108k, so give it a minute or two.
>
>If anyone knows what has happened to qrz.net ftp access, I'd appreciate
>knowing. I can't access my web pages for maintenance. All my other sites
>work as normal.
>
>Gary
>
>a g 0 n at a r r l dot n e t
>http colon slash slash mcduffie dot ws
>--
>_______________________________________________
>Towertalk mailing list
>Towertalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
|