I should have re-stated my post last night - several of you have
responded like Steve did in stating that YO does not recognized lumped
loads.
I guess what I am asking for is a model with the equivalent full sized
elements... I am designing a 3 element version of the Cushcraft
employing some Telrex pieces and parts in my stockpile... it will be
through the boom elements and am initially aiming for the olde fashioned
.20/.15 3 element yagi spacing we used before we had modeling programs.
So it is a "full sized" boom but with the shortened elements...
SO - if you have a YO model of the 40-2CD which uses full sized
electrically equivalent versions of their lumped inductance element
please forward me a copy.
Thanks,
Jim, K4OJ
Steve Miller wrote:
>Hey Jim,
>
>Correct me if I'm wrong, but YO cannot model the loads (coils) or
>capacitance hat structure.
>
>I have spent considerable time of modelling/redesigning the 402-CD
>and have a few paper designs ready for when I get around to reworking
>my pair of 402-CDs. If you can tell me what you're trying to do,
>I'll let you know anything worthwhile from what I've learned so far....
>
>73,
>Steve
>
>
>
>
|