In a message dated 12/20/02 10:54:01 AM Pacific Standard Time,
tmannix@bellsouth.net writes:
> I'll ask again. Anyone have a drawing of the baseplate for this tower which
> includes the rebar details. It would be much appreciated - and it will get
my
> friend(?) off my back! Please help me - he's driving me buggy!
If it's just base size and rebar cage you need, I'd take a look at the
equivalent US Tower model and make some inferences from that. That'll get you
in the ballpark then make it a little bigger/over-engineer it a little and
you should be good to go.
Cheers,
Steve K7LXC
TOWER TECH
|