| To: | <towertalk@contesting.com> |
|---|---|
| Subject: | [TowerTalk] Rohn 25 installation help |
| From: | k2uop@raven-villages.net (Thomas Viselli) |
| Date: | Thu Jun 12 11:57:17 2003 |
I am putting up 30 ft of Rohn 25 using a SBH25G hinged base. I am going to use a Hazer on the tower with a XM-240 40M yagi. The tower will be guyed at the top. Any suggestions on how large a concrete base I should use for this installation. By the way, I know 30 feet is not the optimum height for a 40M beam, but I live on a ridge and the beam will be about 800ft above the valley floor when looking from about 20 degrees to 200 degrees. Thanks for any suggestions. 73, Tom |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [TowerTalk] Ring Rotor Location Advice, kk9a@arrl.net |
|---|---|
| Next by Date: | [TowerTalk] 40 m antenna, Roland J. Guidry |
| Previous by Thread: | [TowerTalk] Tower Spacing?, k2qmf@juno.com |
| Next by Thread: | [TowerTalk] multiple dipoles, Jerry Connelly |
| Indexes: | [Date] [Thread] [Top] [All Lists] |