Towertalk
[Top] [All Lists]

[TowerTalk] Equalizer plates

To: <towertalk@contesting.com>
Subject: [TowerTalk] Equalizer plates
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Fri Aug 15 10:24:36 2003
In a message dated 8/14/03 9:49:08 PM Pacific Daylight Time, 
wf3h@ptdprolog.net writes:

> I'm putting up a 70' Rohn 25 tower for a friend, but he needs equalizer 
>  plates for the 2 sets of guys. Anyone know where to get them? Apparently 
no 
>  one has 'em.

    Make your own - there's nothing special about them. You just need two 
1/4" steel plates with a big anchor bolt hole in one end and however many you 
need for your turnbuckles on the other. Paint with cold galvanizing spray paint 
and you're good to go. 

Cheers,
Steve     K7LXC
TOWER TECH 
<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Equalizer plates, K7LXC@aol.com <=