Although I do not work on towers extensively but, I must ask why
anyone working at extreme heights would want to use a cresent
wrench (otherwise known as a knukle buster) ?
On 24 Nov 2003 at 7:19, FireBrick wrote:
> Just found a great product for us antenna/tower types.
> At Ace hardware, they now sell a work glove, fingerless leather with a
> magnetic patch over the back of the hand portion.
> The magnetic patch will hold screws, washers etc.
>
> Obviously won't hold copper/brass or a large crescent wrench. :-)
>
>
> -----------------------------------------------------
> We were born naked, wet and hungry. Then things got worse.
> -----------------------------------------------------
>
> Bill H. in Chicagoland
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|