Phillystran is fiberglass if I'm not mistaken....Any chance of it 'crazing'
or cracking over the years?
Bob/WF3H
----- Original Message -----
From: <Cqtestk4xs@aol.com>
To: <TOWERTALK@contesting.com>
Sent: Wednesday, January 07, 2004 2:28 AM
Subject: Re: [TowerTalk] Guy wire / Phillystran vibration
> I too, have experienced vibration in my Philly elements, but only on my
200
> foot 20 meter tower....and only one of the guys from the 190 foot level.
I
> know it's the guy and not the antennas because I can dampen it with my
hand on
> the ground. And yes, it is tensioned correctly with the Loos. It's been
doing
> it for six years.
>
> Bill
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|