Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn Tower Modifcation

To: "towertalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rohn Tower Modifcation
From: "Tower (K8RI)" <tower@rogerhalstead.com>
Date: Mon, 23 Feb 2004 14:33:03 -0500
List-post: <mailto:towertalk@contesting.com>

The proximity to an airport here in the states is up to 5 miles.
It's approximately a 20,000 to one ratio in feet from the end of the nearest
runway.  Beyond 5 miles the 200 foot limit for lighting applies.

If closer than 5 miles then I'd make sure it complied with all the gradient
and proximity regulations from the site listed below.

Roger Halstead (K8RI, EN73 & ARRL Life Member)
N833R, World's Oldest Debonair (S# CD-2)
www.rogerhalstead.com

> Not sure on all the tower specs, but you might be careful on your
> estimations of whether or not it needs lighting. You need to check your
> proximity to the nearest airport, small or large to know whether the tower
> requires lighting. If you are unsure you can contact ASAC or Sitesafe
> (http://tools.sitesafe.com/faa/) for a study.
>
> Cameron
> ----- Original Message -----
> From: "isp" <isp@bnjcomp.com>
> To: "towertalk" <towertalk@contesting.com>
> Sent: Sunday, February 22, 2004 11:19 PM
> Subject: [TowerTalk] Rohn Tower Modifcation
>
>
> > I am new to this list today.  Can't even believe with my other mail I
> really
> > signed up for another list but I guess I am gluttening for punishment.
I
> > have been doing some research for my tower I am putting up and as I
search
> > google it kept coming up with stuff from this list.  So from that I
> guessed
> > this towertalk list had other useful information on it.
> >
> > so my question at hand.
> > I have gotten a Rohn SSV tower.  I bought it 2nd hand from a company
about
> a
> > year ago and it has been in a pile until last week.  I was afraid that
all
> > the pieces might not be there but after two days of me and a coworker
> > putting it together I have found all the pieces are there. What a
> relief!!.
> > I read the specs several times over the last year and read and read and
> read
> > Rohn's stuff about the tower.  But it was not until I put it together
that
> > it really set in how big this tower was.  I have a ROHN SSV tower,
> sections
> > 8N through 14N giving me 140' of tower.   My specs are going to take
about
> > 17 yards of concrete to hold it in the air properly.
> >
> > I understand once I put it in air it is there for good so if I ever want
> to
> > add onto it then I should do it now.   All my sections are tapered
except
> > the 8N which is a straight section.  I called a couple of people with
> > various advice.  One of them says if it was him he would just add a
couple
> > of 8N straight giving me a total of 180' with top 60' being straight
8N's.
> > Another says I can take off the 8N straight and add a 8N tapered, 7N
> tapered
> > and then a straight 6N section.  Another says to not waste money and
leave
> > the straight 8N and add a tapered 7N and then a straight 6N section.
This
> > last person says it will be stable just look like an Apollo rocket ship.
> My
> > first concern is this tower was engineered the way it is and should I
add
> > stuff ontop of it and will it still be stable.   From what I understand
it
> > was engineered for 6  300 lb antennas to be at the 140' mark but that
was
> > rumor and have no way of finding out for sure.  I did have to help take
> one
> > of the 300 lb antennas off of it when I bought it.  It did have large
> > brackets on it where other large antennas had been on it.   I tried to
get
> > engineering  drawings on it from ROHN when I bought it with NO success
at
> > all so I am out of luck on that side.
> >
> > So from all you experts out there what would you do?  Thoughts?
> >
> > Also I really would add 3 sections to it but that would put me at 200'
and
> > then I have to deal with lighting and don't want to do that.  Of course
I
> > considered putting on 3 sections and cutting off 1-2 foot off top thus
> > making the tower 198-199' tall and I think would avoid lighting that way
> > also.  But it goes back to engineering and now I am altering an actual
top
> > leg of tower.
> >
> > thanks in advance for facts, theories, swags, etc.
> >
> >
> > terry
> >
> >
> >
> > _______________________________________________
> >
> > See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any
> questions and ask for Sherman, W2FLA.
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>