My DeSoto had a frozen engine when I got it. I put some Marvel Mystery Oil
in each hole and let it sit for half a day. Broke it loose by hand after
that. Amazing stuff.
Marlon
(509) 982-2181 Equipment sales
(408) 907-6910 (Vonage) Consulting services
42846865 (icq) And I run my own wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
----- Original Message -----
From: "Tuva Traveler" <tuvaorbust@hotmail.com>
To: <rex@lint.mv.com>; <towertalk@contesting.com>
Sent: Thursday, March 11, 2004 1:49 PM
Subject: [TowerTalk] Getting old tubing apart
> Arne,
>
> What lubricant did you use to get things apart?
>
> Rex K1HI
>
> After the usual, penetrating oil, etc...I had some success using a
> bernzomatic torch and a hammer, tapping, to heat and break up the fuzed
> oxides inside the frozen tubes....
>
> 73, de Pat AA6EG
> aa6eg@hotmail.com
>
> _________________________________________________________________
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|