you dont really have to go through the modeling route.
simply make the driven element 1 wavelength at the intended frequency, and the
reflector 5% longer.
You can feed it directly with 50 ohm line or if you are a purist, use a balun
of some sort.
Gain will be good, F/B acceptable, and it is simple, quick and cheap.
The ARRL boom length of 13 feet is good, but your existing 12 foot boom will be
fine, and might not be
worth the mechanical trouble of lengthening. (Dont think you will really notice
a difference in actual use)
'I'll probably get flamed for this, but in my opinion, we are "reinventing the
wheel" by modeling everything.
The textbook approach works fine, although some final adjusting might be in
order.
Been building quads the old fashioned way for decades... 1 wavelength,
reflector 5% longer... it works!!!!!
Good luck with it, hope to hear you on Field Day...!!!
73, Mike KM1R
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|