Re: [TowerTalk] Broken elements

[Doug Renwick <ve5ra@sasktel.net>]

One other thing to keep in mind is that the problem could be just antenna
specific...one design that has the problem...all the other Force-12 designs
may not have the problem.

Doug

WD4K wrote:

> Without starting the dreaded rivets/aircraft/antenna debate again, something
> should be said about constructing antennas with rivets. Case in point I have
> in the air now 46 Force 12 elements, 3-C31XR's, Mag340N, 180B. A couple of
> the C31's have been up, down, disassembled, reassembled at a different
> qth--ie: a LOT of chance for poor assembly and screwed up rivet holes.
> However, I have never ever had a broken tip, wallowed out holes or any other
> problems with these antennas or their durability. None...


--
Doug Renwick VA5DX
PO Box 50, Clavet, Saskatchewan, Canada S0K 0Y0
VE5RA@sasktel.net
First VE5 9BDXCC
What profit it a ham if he gains all the awards yet forfeits his soul?
I'll run the race and I will never be the same again.

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk