Sorry this a slightly little off topic (but not nearly as much as ISO9001
compliance). Anyone know where I can get right-angle motorola
connectors (e.g. the standard male car radio connector). Specifically
I need something that will change a long straight Motorola male
plug into a right-angle that makes a nice sharp turn (there isn't
much room between the firewall of my Ford pickup and the back
of the radio. A short jumper cable with a Motorola female jack on
one end and a Motorola right angle male on the other end would
do nicely. I recently got an antenna switch (see its sorta appropriate
for TowerTalk) that goes between my car radio and the factory
antenna , and the switch uses a long straight male plug which won't
clear the firewall.
Thanks,
Mike, W4EF............................
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|