I am thinking of dragging a 2 meter collinear vertical up in a tree. I am
under CC&Rs like many of us and just cannot make out some of the group on
simplex that I like to frequent using the vertical or the 4 elt beam or 5 elt
quad in the attic. The tree would be somewhat higher than the attic and the
antenna would be camouflaged by the tree.
My questions concern suspension and "insulation". The main portion of the
antenna is wrapped with something except for the stinger. I would probably
need to insulate the stinger at least from branches but how? Electrical tape,
neoprene tubing?
What about suspension? Egg insulator at the tip with nylon cord somewhat like
a wire antenna then insulator to suspension cord?
Thanks es 73, de Jim KG0KP
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|