Hi Tom,
My HamIV was a Ebay special (...which didn't work. Imagine that!). Norm did
mine too, and
it's been trouble free. My Rotor cable is nothing special and the run is over
100'. I've not
had the least bit of problem with it, even with "marginal" wire gauge for the
length of run.
I'd be tempted to check the interconnect both at the control box (and more
likely)
at the base of the rotor. Don't know if you have the screw terminals or the
Molex-type
connector, but check those carefully.
The indicator is a pretty simple circuit, so there's only a limited number of
things that
could go wrong! (Famous last words!)
Good luck and let us know what you find
John K5MO
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|