Towertalk
[Top] [All Lists]

Re: [TowerTalk] replacing relay

To: "TowerTalk List" <towertalk@contesting.com>
Subject: Re: [TowerTalk] replacing relay
From: "W3YY" <w3yy@cox.net>
Date: Wed, 20 Oct 2004 23:32:31 -0000
List-post: <mailto:towertalk@contesting.com>
Les -

Are you familiar with solder wick?  This is used to suck up any excess
solder from a solder point.  If you have multiple points that need to be
unsoldered to release a component, this is the way to go.  Solder wick is
available from electronic supply stores and Radio Shack.

73, Bob - W3YY


----- Original Message ----- 
From: "Les" <lkemble@charter.net>
To: <towertalk@contesting.com>
Sent: Monday, October 18, 2004 8:22 PM
Subject: [TowerTalk] replacing relay


Does anyone know of an easy way to unsolder a relay from a Amertron RCS-4?

                                              Les
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>