Jim
If the antenna is not to big. i.e. less that a 20 Meter mono bander (4
or 5 el) then mount the AlfaSpid on the very top of the tower then put
the antenna on top of the rotator see the pictures at
http://www.alfaradio.ca/r1anf.php . This is what the boys with the
Russian Antarctic Expedition did. They have a 3 Element SteppIR on the
top of a AlfaSpid Rotator.
Mitch /VE6OH
Jim Spears wrote:
>anybody tried this combination? can it fit inside the tower to replace a T2X?
> the inside dimension of the3 faces of the inside (top) section is about 11.5
>+ a bit inches (14 inches at outside, 1.25 inch tubes).
>
>Jim
>N1NK
>_______________________________________________
>
>See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
>Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
>questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|