Assume a stack of four tribanders, each rotatable. The top two are phased
using a StackMatch II. Same for the lower two. The upper and lower pairs
are phased using a third StackMatch II. Thus, you have a myriad of possible
antenna selections available (1, 2, 3 ,4, 1&2, 1&3, 1&4, etc. to 1&2&3&4).
Is there a way to model the pattern when using all 4 and each antenna is
pointed in a different direction? For example, say the top is pointed NE,
#2 pointed SE, #3 pointed SW and #4 pointed NW. In your opinion, would this
work well enough to select one antenna while receiving and then drop the
others and use it for a QSO? Thanks in advance for your comments.
Keith NM5G
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|