Norman J McSweyn wrote:
> When cleaning out the tubes, I found two of them had a calcium like deposit
> inside. I couldn't move it with 160psi air. It took a trip to sears hardware
> to get some rod stock to "drill" out the obstruction.
--------
2 other good choices for cleaning the inside are:
1. Brake hones ( used for smoothing the inside of brake cycinders )
Any auto store
2. Shotgun bore bristles. If mounted in a drill, it will clean out
just about anything.
Try to use the larger sizes ( 12 guage ) for the larger tubing and
work down from there.
Both work well.
73
Ed
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|