Hi,
I have an 18"x18" square copper plate. I am going to connect copper grounding
lugs to this plate along the outer perimeter. I have drilled and tapped holes
in the copper plate to hold the grounding lugs but my question is-should I
simply screw/bolt the lug to the copper plate or would it be better to
screw/bolt and then solder the copper lugs to the copper plate? Also, do I
need to coat with any antioxidant. All hardware other then the copper plate
(1/8" thick) and the grounding lugs is stainless.
Thanks,
Richard - KJ7CU
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|