Towertalk
[Top] [All Lists]

[TowerTalk] Source for 3/4" Diameter Steps for Union Metal Tower?

To: towertalk@contesting.com
Subject: [TowerTalk] Source for 3/4" Diameter Steps for Union Metal Tower?
From: K4VV@aol.com
Date: Thu, 13 Oct 2005 17:28:06 EDT
List-post: <mailto:towertalk@contesting.com>
A Union Metal Tower that I purchased and restored needs eight 3/4" steps 
replaced and three more added (using a molded steel base that would need to be 
welded to the tower).
I don't find Union Metal on the Internet.  Will appreciate suggestions (by 
direct reply) to locate steps. 

Jack Hammett
k4vv@aol.com
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Source for 3/4" Diameter Steps for Union Metal Tower?, K4VV <=