My run to the tower is about 170'. I used heavy duty rotor cable 6 #18
and 2 #16 I think.
Julio, W4HY
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of
craig@thompsonet.com
Sent: Thursday, November 03, 2005 7:51 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Remote Cable
I will be putting up a HDX589MDPL self supporting tower w/ motor drive
and the RMC1000 remote. I would welcome a recommendation on a cable
between the tower and the remote. The run is 100 feet and will be with
other low voltage cables. Power is supplied at the tower.
What do you recommend?
Thanks, Craig
K9CT
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|