Towertalk
[Top] [All Lists]

[TowerTalk] OT??? High power 2.4 GHz rules change

To: towertalk@contesting.com
Subject: [TowerTalk] OT??? High power 2.4 GHz rules change
From: "Marlon K. Schafer (509) 982-2181" <ooe@odessaoffice.com>
Date: Wed, 17 May 2006 09:03:37 -0700
List-post: <mailto:towertalk@contesting.com>
Hi All,

As I'm sure you guys are aware, HAMs are primary users in about half of the 
2.4 gig band.  When using APC you can run very high wattage.  I can't 
remember if it's 100 or 1000.  This is for video as I recall.

There's a proposal to drop the APC requirement.  As a board member of the 
Wireless Internet Provider's Association (www.wispa.org) I've been asked to 
ask for your input on the issue.

WISPs, and other license exempt users, are limited (for all practical 
purposes) to 4 watts for our broadcast sites.  And much of the gear is 
contention based, so anything that's always on tends to cause great 
headaches and gnashing of teeth.

We will likely fight this new proposal but wanted input from the HAM 
community first.

Are there people using this ability today?

What's it used for?

Any plans for more high power 2.4 gig use?

Are there any reasons that we shouldn't come out against the proposal to 
drop the APC requirement?

Am I missing anything?  Asking the wrong questions etc?

Thanks all!
Marlon
(509) 982-2181                                   Equipment sales
(408) 907-6910 (Vonage)                    Consulting services
42846865 (icq)                                    And I run my own wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>