>From: kd4e <kd4e@verizon.net>
>Subject: [TowerTalk] Loading a Pro-AM 160M on other bands?
>Date: Fri, 16 Feb 2007 12:03:31 -0500
>Is the coil and feed system on such a vertical
>such that trying to load it on 80, 40, 20, etc.
>via an antenna tuner is a waste of time?
Every loading coil has a self-resonant frequency somewhere above the
frequency it is used on for mobile operation. It occurs at the frequency
where the distributed capacitive reactance is equal to the inductive
reactance. A mobile loading coil should not be operated at or above
its self-resonant frequency. As a data point, my 75m bugcatcher coil
is self-resonant around 6 MHz, making it not useful on 40m.
160m loading coils are large with lots of distributed capacitance. Odds
are, they are all self-resonant before the 80m frequency is reached
and certainly before any of the other HF frequencies. So, to answer
your question, operating a loaded mobile antenna far above its resonant
frequency is usually an extreme waste of RF energy.
--
73, Cecil, w5dxp.com
_________________________________________________________________
The average US Credit Score is 675. The cost to see yours: $0 by Experian.
http://www.freecreditreport.com/pm/default.aspx?sc=660600&bcd=EMAILFOOTERAVERAGE
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|