OK I have gotten the replacement cables from US Towers. Any tips from
the folks who have done this project yet? The short cable for the upper
section seems pretty straight forward. It is the routing of the cable
through the motor drive that concerns me a little. I do plan on taking
lots of pictures before and during the process. I also have access to
two other units to check things out but both the closest is 30-40
minutes away.
Thanks
Phil
N9LAH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|