yes, I have a TB6EM and it uses a T-match constructed from #8 aluminum then
fed with a coax balun with a 10m gadet wire (old school) balun.
later,
dave
wa3gin
----- Original Message -----
From: <n8de@thepoint.net>
To: "Paul Cassel" <paul@ve3sy.com>
Cc: <towertalk@contesting.com>
Sent: Sunday, July 01, 2007 1:55 PM
Subject: Re: [TowerTalk] Seeking Telrex feed impedance and Manual 4 el20m
Telrex
Most of those old Telrex antennas used a T-Match.
Look in ARRL Handbooks and Antenna Handbooks.
Don
N8DE
Quoting Paul Cassel <paul@ve3sy.com>:
> Would anyone know what the feed Impedance is for the older TELREX 10 and
> 15M532 series of antennas? The described original ¼ wave 75 ohm balun
> gives
> the appearance of something like a 4 or 6 to 1.
>
> Also looking for a manual for a 20 metre 4 element Telrex beam that is on
> about a 35 foot boom.
>
> Thanks all
>
> Paul VE3SY
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|