Towertalk
[Top] [All Lists]

Re: [TowerTalk] Stainless Clamps Needed

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Stainless Clamps Needed
From: Bob Smith <na6t@na6t.com>
Date: Sun, 29 Jul 2007 01:05:18 -0700
List-post: <mailto:towertalk@contesting.com>
I found the link for the Zinc Plated clamps with stainless steel 
hardware on M2's website,  they are sold in pairs,,

Matt can also get the stainless variety for a little more money.

click on the link below
http://www.m2inc.com/index2.html

Then

1   click on the "online Ordering" tab at the top of the page
2.  click on the 'U Bolt Kits & Misc. Hardware" link that is in RED

They don't have a link on the website directly to this page

hope this helps,

Bob



Another place to try for stainless steel muffler clamps with saddles is
M2 Antennas

http://www.m2inc.com/

4402 N. Selland Ave. Fresno, CA 93722
Tel: (559) 432-8873 Fax: (559) 432-3059

Ask for Matt, Mike's Son.   I've purchased a lot of the Stainless steel clamps
from him for antennas and antenna mount installs on towers.  Just tell him the
size and they usually have it.  They use a lot of the stainless steel 
variety in
their antenna manufacturing business..

hope this helps

Bob

Robert Smith Consulting
"Wireless Installations -- Government, Businesses & ISP's"
F.C.C. Licensed-Commercial & Amateur Services
A.R.S NA6T
ARRL Life Member
Fort Bragg, California   95437

"On The Air-Conditioned Mendocino Coast, In REAL Northern California"
No trees were destroyed in the sending of this message.
However, a large number of electrons were terribly inconvenienced.
------------------------------

Message: 3
Date: Tue, 24 Jul 2007 14:08:22 -0400
From: "mryan001" <mryan001@tampabay.rr.com>
Subject: [TowerTalk] Stainless Clamps Needed
To: <Towertalk@contesting.com>
Cc: TowerTalk-bounces@contesting.com
Message-ID: <OFEKLNLCAKAFKNOAELMBGEFNDLAA.mryan001@tampabay.rr.com>
Content-Type: text/plain;       charset="iso-8859-1"

I know, I know, that DX Engineering sells them. They are beautiful, glow in
the dark...almost too nice to use. Maybe put them on the mantle next to the
family picture.  I have a champagne tastes with a beer budget. I need 1 1/2"
clamps WITH SADDLES and perhaps some other sizes. THEY MUST HAVE SADDLES.  I
have 2" clamps. Any ideas where ELSE to find these?   Thanks...  - Mike



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>